CEMACON Brick
Ceramic blocks developed to provide strength, energy efficiency, and a healthy living environment. CEMACON…
Brick slips
Made in Romania from 100% natural clay, CEMACON brick slips give facades and interiors…
Lintels
Structural elements that support masonry above doors and windows, contributing to the safety and…
Chimneys
Mortars
Thermal insulating mortars for building and plastering walls, with heat transfer up to four…
© 2026 Cemacon. All rights reserved.
Privacy PolicyON0105 brick slips impress with their refined anthracite grey shade, a deep colour that adds depth to any clad space. The sober tone evokes a clearly defined, timeless urban or industrial style.
Pretorium brick slips have a strong presence, highlighting architectural lines and making them ideal for minimalist concepts. ON0105 brick slips can be used to clad interior accent walls, where texture and colour help create a memorable visual contrast, as well as in restoration projects seeking to combine original character with contemporary aesthetics.
Their versatility allows harmonious integration into residential and commercial spaces, making them a design element that brings style, coherence and expressiveness to every project.
Why choose ON0105 brick slips:
• A modern, industrial appearance – anthracite grey;
• Ideal for minimalist yet current concepts;
• Smooth texture suitable for modern and contemporary projects.
* The stated consumption rates exclude technological losses, which are project-specific. As a rule of thumb, an additional 5% should be allowed.
Install the brick slips at an air and substrate temperature of 5 to 30 degrees.
The choice depends on the building type, wall thickness, strength requirements, thermal and acoustic insulation needs, and the technical design. If you need help, Cemacon specialists can recommend the best solution for your application.
This material contains general information on installing Cemacon brick slips. For complete installation details, we recommend consulting the manufacturers of thermal insulation systems that hold certifications for cladding such systems with brick slips.
This material contains general information on installing Cemacon brick slips. For complete installation details, we recommend consulting the manufacturers of thermal insulation systems that hold certifications for cladding such systems with brick slips.
ON0105 brick slips stand out for their refined anthracite grey shade and smooth texture. They are suitable for modern, minimalist or industrial-inspired projects where the ceramic finish needs to provide depth, contrast and a timeless look.
ON0105 can be used outdoors and indoors. It is suitable for façades, accent walls, residential spaces, commercial spaces or restoration projects seeking to combine original character with contemporary aesthetics.
ON0105 brick slips are available in 240 x 71 x 9 mm and 240 x 71 x 14 mm formats. With a 10 mm joint, the estimated quantity required is 49 pieces/m², excluding installation waste, which may vary according to the project.
ON0105 is available as flat slips, corner pieces and corner elements. These options allow consistent cladding of flat surfaces, edges, corners and architectural details.
For installing ON0105 brick slips, Cemacon recommends class C2TE S1 adhesive and flexible, water-repellent mineral grout. Installation should take place at an air and substrate temperature between 5 and 30°C.
Be the first to leave a review.
Leave a review: