CEMACON Brick
Ceramic blocks developed to provide strength, energy efficiency, and a healthy living environment. CEMACON…
Brick slips
Made in Romania from 100% natural clay, CEMACON brick slips give facades and interiors…
Lintels
Structural elements that support masonry above doors and windows, contributing to the safety and…
Chimneys
Mortars
Thermal insulating mortars for building and plastering walls, with heat transfer up to four…
© 2026 Cemacon. All rights reserved.
Privacy PolicyIn varied shades ranging from vibrant red to brick red, VR0104 brick slips evoke the beauty and natural textures of traditional bricks, with modern cream and white accents that add brightness.
VR0104 brick slips bring the authentic charm of traditional bricks back to the fore in a modern reinterpretation with cream and white accents that add brightness and visual balance. The result? Expressive aesthetics rich in detail, capable of transforming any façade into a memorable design element.
VR0104 brick slips can be used to create bold contrasts or harmoniously complement an existing architectural concept, giving depth and character to the space. They are the right choice for those seeking originality, timeless aesthetics and a material that combines tradition with modern expressiveness.
Why choose VR0104 brick slips:
• An authentic, natural appearance combining traditional and modern styles;
• Bold colours – from vibrant red to brick red, with cream and white accents;
• The smooth texture gives the space elegance and uniformity;
* The stated consumption rates exclude technological losses, which are project-specific. As a rule of thumb, an additional 5% should be allowed.
Install the brick slips at an air and substrate temperature of 5 to 30 degrees.
The choice depends on the building type, wall thickness, strength requirements, thermal and acoustic insulation needs, and the technical design. If you need help, Cemacon specialists can recommend the best solution for your application.
This material contains general information on installing Cemacon brick slips. For complete installation details, we recommend consulting the manufacturers of thermal insulation systems that hold certifications for cladding such systems with brick slips.
This material contains general information on installing Cemacon brick slips. For complete installation details, we recommend consulting the manufacturers of thermal insulation systems that hold certifications for cladding such systems with brick slips.
VR0104 brick slips stand out for varied shades of vibrant red and brick red, complemented by cream and white accents. The smooth texture offers elegance and uniformity, while the overall appearance combines traditional aesthetics with modern expressiveness.
VR0104 can be used outdoors and indoors for façades, decorative walls or accent areas. It is suitable for projects seeking an authentic, bright ceramic finish with a strong visual impact.
VR0104 brick slips measure 240 x 71 x 9 mm. With a 10 mm joint, the estimated quantity required is 49 pieces/m², excluding installation waste, which may vary according to the project.
VR0104 is available as flat slips, corner pieces and corner elements. These options allow consistent cladding of flat surfaces, edges, corners and architectural details.
For installing VR0104 brick slips, Cemacon recommends class C2TE S1 adhesive and flexible, water-repellent mineral grout. Installation should take place at an air and substrate temperature between 5 and 30°C.
Be the first to leave a review.
Leave a review: